Tradeline Worktops, Splashbacks, Upstands and Sheet laminates:
Tradeline kitchen worksurfaces are manufactured to exacting standards using high specification, high value materials. With popular HPL colours, new textures, 3600mm & 3000mm worktops, two sizes of breakfast bar together and with 30mm & 40mm options available, Tradeline now offers you even greater design flexibility together with great Value!
Please Note:We can only deliver Tradeline worktop within the Midlands area at this time. You could consider Anyvan.com for your delivery - See feature at the bottom of this page.
Technical Details
30mm Worktops
Length
Thickness
Width
3,000 mm
30 mm
600 mm - Postformed one long edge
3,000 mm
30 mm
900 mm - Postformed both long edges
40mm Worktops (Satin/Matt/Smooth)
Length
Thickness
Width
3,600 mm
40 mm
600 mm - Postformed one long edge
3,000 mm
40 mm
665 mm - Postformed both long edges
2,025 mm
40 mm
900 mm - Postformed both long edges
40mm Worktops (Gloss/Slate/Deep Star)
Length
Thickness
Width
3,600 mm
40 mm
600 mm - Postformed one long edge
3,000 mm
40 mm
600 mm - Postformed one long edge
3,000 mm
40 mm
665 mm - Postformed both long edges
2,025 mm
40 mm
900 mm - Postformed both long edges
Splashbacks
Length
Thickness
Width
2,400 mm
9 mm
1,200 mm
2,400 mm
9 mm
600 mm
Upstand
Length
Thickness
Width
3,000 mm
12 mm
70 mm
Sheet Laminate
Length
Width
3,050 mm
1,320 mm
3,660 mm
1,320 mm
Specification:
The Tradeline high pressure decorative laminate surface is manufactured to EN438, and is inherently heat, moisture and UV resistant. The surface also provides protection from impact and is highly resistant to wear.
30mm worktops have a 12mm radius on front edge. 40mm worktops have a 10mm corner radius to top and bottom edges.
The substrate is a high density chipboard manufactured to EN312 part 3 P2 grade.
The rear edge is sealed against moisture ingress with an injected hot melt wax.
A resin impregnated foil is applied to the underside of the worksurface to offer moisture resistance.
The underside of the 40mm worksurface is rebated along the full length and a polyurethane resin is inserted to act as an additional moisture barrier.
The decorative laminate of the 40mm worktops is wrapped under the worktop to provide a drip barrier against water ingress.
Worktops are supplied with a half length laminate edging strip.
Benefits:
Excellent value.
Great choice of popular colours and textures.
Superior moisture protection.
Tradeline worktops are protected during transit by heavy duty shrink wrapped polythene.
All worktops are supplied with a free half length laminate edging strip and care leaflet.
The prestigious FIRA Gold Award has been awarded for both 30mm and 40mm range of Worktops underlining the quality of worktops from Tradeline.
One free cut: Worktop prices also include a single cut across the width, if required, making transportation easier. However please allow for a 25mm 'spoilage' when specifying the exact position of the cut.
Cleaning: A moist cloth is all that is needed to clean the worktop. More stubborn marks and grease can easily be removed with a little washing up liquid or, in the case of difficult to remove marks, methylated spirits can be used sparingly. For further guidance please refer to the care leaflet supplied with each worktop.
All our fitted kitchen carcase units are factory glued & doweled for rigid construction and delivered to you fully assembled, saving you time & money on your kitchen installation.
CLIP top BLUMOTION soft close hinges and Blum TANDEMBOX full extension soft close drawer systems come as standard on every kitchen.
Because every new fitted kitchen is unique, our collection of on-line kitchen design photo's can be inspirational and a catalyst for your own kitchen ideas.
SSL