Home PageUp a Level2009/10 CatalogueTerms & ConditionsProduct SearchView Your BasketGo to CheckoutContact 3D Kitchens LimitedTrade Account Login
Click to chat
Customer Service Rating by LivePerson
Live Chat Explained
 

Share, save or e-mail this page

Approach & Route Planner

Broadoak Sanded


2010 Kitchen Catalog | Timber Doors | Broadoak Sanded



When painting the Broadoak Sanded doors: -

When painting the Broadoak Sanded doors: -

1) Doors should be lightly sanded.
2) Apply oil based undercoat (water based will flake & scratch).
3) Apply paint.

Offering the best of both worlds, Broadoak Sanded harnesses the everlasting qualities of oak in a smooth sanded state ready for bespoke finishing. The solid oak frame and veneered centre panel are prepared for the most modern or traditional individual kitchen and complete the look with a range of decorative yet practical features and accessories.

Before you make a major purchase of doors and accessories why not purchase a Broadoak Sanded sample door first. If you go on to purchase a range of doors, drawers and accessories we'll refund the cost of your sample.
Sample door size: 355x297mm.


More Info...
Please select your drawer front choice from the list below. Please note that these are drawer fronts and not complete drawer assemblies.


More Info...
This selection of door sizes are commonly used as both door and drawer fronts.


More Info...
Please select your door choice from the list below. Please note these doors are not pre-drilled for hinges.


More Info...
Broadoak Sanded frame only. Allows customers the option to choose their own style of glass. Frames are supplied with beading


More Info...
Broadoak Sanded steel mesh for frame door.

Steel mesh used: -
stainless steel plain weave: 6 mesh x 1.25mm diameter wire.
aperture size: 2.98mm
nominal thickness: 2.7mm


More Info...
Broadoak Sanded curved door in 2 height options, 715mm x 319.5 x 319.5 and 895mm x 319x5 x 319.5. Suitable for both wall and base unit applications (for 560mm deep base unit use with 715x257 door). A carcase jig, CCJIGTIM, is available.

PLEASE NOTE: This item is only suitable for use in a painted kitchen. We do NOT recommend that this item be used for an oiled or stained finish.


More Info...
Broadoak Sanded veneered MDF cornice. Total width 130mm (overhang 80mm) Height when fitted 37mm

3030x130x36.5mm


More Info...
Broadoak Sanded curved corner block which can be used on top of a wall unit or dresser, above a radius feature end. The corner blocks are available in left hand or right hand options and should be used in conjunction with the BSC30 Broadoak Sanded cornice. The end of the unit that it is to be used on (as you look at it) determines handing.

135mm wide x 180mm long x 37mm high.
Projection: 85mm (distance stands out from radius feature end)



More Info...
Broadoak Sanded curved lighting pelmet section for 300mm wall unit, left and right handed.


More Info...
Broadoak Sanded veneer wrapped MDF pelmet which can also act as a modern cornice or pilaster. Finished 3 sides. When fitted as pelmet 50mm high x 28mm deep. Has 1.5 x 1.5 mm bevel between finished edges.


More Info...
Broadoak Sanded curved lighting pelmet section for 300mm wall unit, left and right handed.


More Info...
Broadoak Sanded plinth,
3050 x 150 x 16mm


More Info...
Broadoak Sanded curved plinth section for 560x300mm curved base unit.


More Info...
Broadoak Sanded corner post, 715 x 70 x 20mm


More Info...
Broadoak Sanded bottle rack profile, 1200mm long and can be cut to size. Has 13 grooves for bottles.

1200x58x20mm.


More Info...
Broadoak Sanded modern style bottle rack with lightweight stainless steel effect tubes. Each tube is 14mm dia., and fitted at 80mm centres, with an exposed height of 390mm.


More Info...
Broadoak Sanded plate rack made from solid timber spindles and rails. 1200mm long but can be cut down. Features 25 x 10mm diameter dowels at 47mm centres, set between 18mm top and bottom rails.

1200 x 336 x 18mm.


More Info...
Broadoak Sanded modern style plate rack with 25 lightweight stainless steel effect tubes. Each tube is 14mm dia., and fitted at 48mm centres, with an exposed height of 298mm.


More Info...
Broadoak Sanded quadrants made from veneered panels. The top, base and side boards are 28mm thick, while the shelves are 18mm. Supplied ready to assemble.


More Info...
Broadoak Sanded quadrants made from veneered panels. The top, base and side boards are 28mm thick, while the shelves are 18mm. Supplied ready to assemble.


More Info...
Broadoak Sanded 800mm wide cooker canopy. The size of the fascia used on the canopy is 797mm wide x 463mm high and matches the doors of the range. Supplied ready to assemble.


More Info...
Broadoak Sanded spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
* 2 x Drawer guides, 18mm wide x 200mm deep x 21mm high

The drawer guides are reversible to suit 15 or 18mm carcase material.


More Info...
Broadoak Sanded radius feature end panel pack:

Pilaster is 890/1210/2120mm high x 50mm wide x 100mm deep.
Spacer is 890/1210/2120mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end panel is added (not provided) to give a chunky, rounded finish to a run of units.

The end panel is fixed to the pilaster and spacer by screwing from the rear and then the assembly can be fitted to the unit by screwing from inside the carcase. Screws ...

More Info...
Broadoak Sanded 50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).


More Info...
Broadoak Sanded 50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).


More Info...
Broadoak Sanded end panel, finished on face, reverse and 4 square edges,
2400 x 650 x 18mm


More Info...
Broadoak Sanded end panel, profiled front edge, finished on face, reverse and 3 square edges,
2400 x 610 x 28mm


More Info...
Broadoak Sanded flying shelf, profiled front edge, finished on face, reverse and 3 square edges, 2400 x 325 x 28mm


More Info...
Broadoak Sanded end panel, tongue & groove, profiled front edge, finished on face, reverse plain and 4 square edges,
2400 x 650 x 18mm


More Info...
Curved carcass jig


More Info...

2010 Kitchen Catalog | Timber Doors | Broadoak Sanded

Your Basket
.
.
Items::
.
Value:
.

Go to Checkout
.
DeliverySecure Payments - Find Out More...Customer ServicesYour Money Back Guarantee Easy ReturnsSee Customers TestimonialsVisit Our Showroom
New Products

Unika ColorFill

Unika ColorFill

Unika ColorFill can be used to repair scratches and chips in laminate and melamine worksurfaces.

Find out more...

___________________

Floors by Visiogrande

Floors by Visiogrande

Combine these stunning and life-like surfaces with the ease of installation offered by the new 'megaloc' industry leading click system and it is easy to see why 'Visiogrande' is the laminate floor of the future.

Find out more...

___________________

Schock Opus D150

Schock Opus

The most striking feature of the OPUS range of sinks from Schock is its perfect synthesis of great functionality and elegant design.

Find out more...

___________________

Recycling Bin Set

Recycling Bin Set

Easy to clean
36 and 42 litre capacity
Fits into a 800mm cabinet

Find out more...

 

___________________

Solid Pewter Handles

Pewter Handles

A classic range of solid pewter handles, produced by traditional methods but with a modern design twist.

Find out more...

___________________

LeMans Arena Style

LeMans Arena Style

LeMans corner storage solution brings the shelves out to you when the door is opened in a perfectly controlled and effortless sequence of movements.

Find out more...

___________________

| Top of page |

3D Kitchens Limited
3 Halesowen Road, Halesowen,
West Midland, England, B62 9AA
Telephone 0121 602 3332
Registered in England & Wales - 06853600
VAT Registration Number - 971 4979 69

home | store top | FAQ's | best sellers | new products | view basket | delivery | contact us | links | log in
terms & conditions | privacy | website by 3DKitchens
| copyright © 2009 3D Kitchens Limited | site map

SSL