3D Kitchens Limited - Fitted Kitchen Carcase Manufacturer and Quality Kitchen Door Supplier
Home PageUp a Level3D Kitchen CatalogueTerms & ConditionsFrequently Asked QuestionsSee what's in your BasketGo to CheckoutContact 3D Kitchens Limited3D Kitchen Designs... Follow 3D Kitchens on Twitter . Visit Our Facebook Page
Click to chat
Customer Service Rating by LivePerson
Live Chat Explained
 

Share |

Approach & Route Planner

Comodo Secured

No Rouge Traders Here

Broadoak Sanded


3D Kitchen Catalogue | PWS Classics | Broadoak Sanded



When painting the Broadoak Sanded doors: -

When painting the Broadoak Sanded doors: -

1) Doors should be lightly sanded.
2) Apply oil based undercoat (water based will flake & scratch).
3) Apply paint.

Offering the best of both worlds, Broadoak Sanded harnesses the everlasting qualities of oak in a smooth sanded state ready for bespoke finishing. The solid oak frame and veneered centre panel are prepared for the most modern or traditional individual kitchen and complete the look with a range of decorative yet practical features and accessories.

Click Here for details of our Ready Made Kitchen Carcases

Before you make a major purchase of doors and accessories why not purchase a Broadoak Sanded sample door first. If you go on to purchase a range of doors, drawers and accessories we'll refund the cost of your sample.
Sample door size: 355x297mm.


More Info...
Please select your drawer front choice from the list below. Please note that these are drawer fronts and not complete drawer assemblies.


More Info...
This selection of door sizes are commonly used as both door and drawer fronts.


More Info...
Please select your door choice from the list below. Please note these doors are not pre-drilled for hinges.


More Info...
Broadoak Sanded frame only. Allows customers the option to choose their own style of glass. Frames are supplied with beading


More Info...
Broadoak Sanded steel mesh for frame door.

Steel mesh used: -
stainless steel plain weave: 6 mesh x 1.25mm diameter wire.
aperture size: 2.98mm
nominal thickness: 2.7mm


More Info...
Broadoak Sanded curved door in 2 height options, 715mm x 319.5 x 319.5 and 895mm x 319x5 x 319.5. Suitable for both wall and base unit applications (for 560mm deep base unit use with 715x257 door). A carcase jig, CCJIGTIM, is available.

PLEASE NOTE: This item is only suitable for ...

More Info...
Broadoak Sanded veneered MDF cornice. Total width 130mm (overhang 80mm) Height when fitted 37mm

3030x130x36.5mm


More Info...
Broadoak Sanded curved corner block which can be used on top of a wall unit or dresser, above a radius feature end. The corner blocks are available in left hand or right hand options and should be used in conjunction with the BSC30 Broadoak Sanded cornice. The end of the unit ...

More Info...
Broadoak Sanded curved lighting pelmet section for 300mm wall unit, left and right handed.


More Info...
Broadoak Sanded veneer wrapped MDF pelmet which can also act as a modern cornice or pilaster. Finished 3 sides. When fitted as pelmet 50mm high x 28mm deep. Has 1.5 x 1.5 mm bevel between finished edges.


More Info...
Broadoak Sanded curved lighting pelmet section for 300mm wall unit, left and right handed.


More Info...
Broadoak Sanded plinth,
3050 x 150 x 16mm


More Info...
Broadoak Sanded curved plinth section for 560x300mm curved base unit.


More Info...
Broadoak Sanded corner post, 715 x 70 x 20mm


More Info...
Broadoak Sanded bottle rack profile, 1200mm long and can be cut to size. Has 13 grooves for bottles.

1200x58x20mm.


More Info...
Broadoak Sanded modern style bottle rack with lightweight stainless steel effect tubes. Each tube is 14mm dia., and fitted at 80mm centres, with an exposed height of 390mm.


More Info...
Broadoak Sanded plate rack made from solid timber spindles and rails. 1200mm long but can be cut down. Features 25 x 10mm diameter dowels at 47mm centres, set between 18mm top and bottom rails.

1200 x 336 x 18mm.


More Info...
Broadoak Sanded modern style plate rack with 25 lightweight stainless steel effect tubes. Each tube is 14mm dia., and fitted at 48mm centres, with an exposed height of 298mm.


More Info...
Broadoak Sanded quadrants made from veneered panels. The top, base and side boards are 28mm thick, while the shelves are 18mm. Supplied ready to assemble.


More Info...
Broadoak Sanded quadrants made from veneered panels. The top, base and side boards are 28mm thick, while the shelves are 18mm. Supplied ready to assemble.


More Info...
Broadoak Sanded 800mm wide cooker canopy. The size of the fascia used on the canopy is 797mm wide x 463mm high and matches the doors of the range. Supplied ready to assemble.


More Info...
Broadoak Sanded spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)

More Info...
Broadoak Sanded radius feature end panel pack:

Pilaster is 890/1210/2120mm high x 50mm wide x 100mm deep.
Spacer is 890/1210/2120mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end ...

More Info...
Broadoak Sanded 50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).


More Info...
Broadoak Sanded 50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).


More Info...
Broadoak Sanded end panel, finished on face, reverse and 4 square edges,
2400 x 650 x 18mm


More Info...
Broadoak Sanded end panel, profiled front edge, finished on face, reverse and 3 square edges,
2400 x 610 x 28mm


More Info...
Broadoak Sanded flying shelf, profiled front edge, finished on face, reverse and 3 square edges, 2400 x 325 x 28mm


More Info...
Broadoak Sanded end panel, tongue & groove, profiled front edge, finished on face, reverse plain and 4 square edges,
2400 x 650 x 18mm


More Info...
Curved carcass jig


More Info...

3D Kitchen Catalogue | PWS Classics | Broadoak Sanded

Your Basket
.
.
Items:..
.
Value:..
.

See what's in your basket
.
Home Delivery - Find Out More... Secure Payments - Find Out More...Customer ServicesYour Money Back Guarantee Easy ReturnsSee Customers TestimonialsVisit Our Showroom
What's Hot
Ready Made Fitted Kitchen Carcasses at Trade Prices

Ready Made Cabinets

All our fitted kitchen carcase units are factory glued & doweled for rigid construction and delivered to you fully assembled, saving you time & money on your kitchen installation.

CLIP top BLUMOTION soft close hinges and Blum TANDEMBOX full extension soft close drawer systems come as standard on every kitchen.

Find out more...

___________________

3D Kitchen Designs

3D Kitchen Designs

Because every new fitted kitchen is unique, our collection of on-line kitchen design photo's can be inspirational and a catalyst for your own kitchen ideas.

Find out more...

___________________

Certification Authorities

___________________

| Top of page |

3D Kitchens Limited
3 Halesowen Road, Halesowen,
West Midland, England, B62 9AA
Telephone 0121 602 3332
Registered in England & Wales - 06853600
VAT Registration Number - 971 4979 69

home | store top | FAQ's | best sellers | new products | view basket | delivery | contact us | links | log in
terms & conditions | privacy | website by 3DKitchens
| copyright © 2009 3D Kitchens Limited | site map

SSL