3D Kitchens Limited - Fitted Kitchen Carcase Manufacturer and Quality Kitchen Door Supplier
Home PageUp a Level3D Kitchen CatalogueTerms & ConditionsFrequently Asked QuestionsSee what's in your BasketGo to CheckoutContact 3D Kitchens Limited3D Kitchen Designs... Follow 3D Kitchens on Twitter . Visit Our Facebook Page
Click to chat
Customer Service Rating by LivePerson
Live Chat Explained
 

Share |

Approach & Route Planner

Comodo Secured

No Rouge Traders Here

Bede


3D Kitchen Catalogue | PWS Classics | Bede



Suggested co-ordinating mfc board:-  <br />Egger H3382,  Unilin Decor H327, Kronospan D8932.

Suggested co-ordinating mfc board:-
Egger H3382, Unilin Decor H327, Kronospan D8932.

A perfect unison of classic design and traditional oak, Bede brings you everything you need to lovingly create a kitchen rich in rustic touches. The unmistakable air of simple country charm delivers all the appeal of a timeless classic. Mix this with a wealth of accessories and feature doors and you have all the ingredients for a truly welcoming and easy to live with kitchen.

Click Here for details of our Ready Made Kitchen Carcases

Before you make a major purchase of doors and accessories why not purchase a Bede sample door first. If you go on to purchase a range of doors, drawers and accessories we'll refund the cost of your sample.
Sample door size: 355x297mm.


More Info...
Please select your drawer front choice from the list below. Please note that these are drawer fronts and not complete drawer assemblies.


More Info...
This selection of door sizes are commonly used as both door and drawer fronts.


More Info...
Please select your door choice from the list below. Please note these doors are not pre-drilled for hinges.


More Info...
Glazed grille door with feature glass.


More Info...
Bede traditional cornice made from veneer wrapped MDF.

3050mm long x 78mm wide x 69mm high (when fitted).

An additional shaped base which is 47mm high can also be used with this cornice to offer an alternative look.


More Info...
Bede shaped base section available for use with the cornice to offer an alternative chunky look. Made from veneer wrapped MDF.

Dimensions of base section: 3050mm long x 72mm wide x 47mm high.


More Info...
Bede castellated base section available for use with the cornice to offer an alternative chunky look. Made from veneer wrapped MDF.

Dimensions of base section: 3050mm long x 72mm wide x 47mm high.


More Info...
Bede chunky corner block which can be used on top of a wall unit or dresser, above a radius feature end. The curved corner blocks are available in left hand or right hand options and should be used in conjunction with the cornice and cornice base. Handing is determined by the ...

More Info...
Bede lighting pelmet made from veneer wrapped MDF.

3050mm long x 50mm high x 18mm thick.


More Info...
Bede castellated ighting pelmet made from veneer wrapped MDF.

3050mm long x 50mm high x 18mm thick.


More Info...
Bede plinth made from veneer wrapped MDF.
3050mm long x 150mm high x 16.5mm thick.


More Info...
Bede shaped plinth made from veneer wrapped MDF.

3050mm long x 160mm high x 25.5mm thick.


More Info...
Bede corner post, 715 x 70 x 20mm


More Info...
Bede framed wall quadrant. 720mm high x 320mm x 320mm.

Supplied in component form.

More Info...
Bede unhanded, framed floor quadrant. 720mm high x 320mm wide x 580mm deep.

Supplied in component form.


More Info...
Bede cooker canopy, 800mm wide x 775mm high x 474mm deep. The front of the canopy has a 797mm x 463mm fascia in the same style as the doors. Supplied in component form.


More Info...
Bede tongued & grooved canopy: -
Width: 1000mm (can be cut down to 800mm)
Height: 610mm (can be reduced by up to 170mm)
Hood depth: 176mm (plus 18mm backboard)
Total depth: 484mm


More Info...
Bede bottle rack which has 13 grooves for bottles and can be cut to size.

1200mm long x 58mm high x 20mm thick.

91mm between centre of each groove.


More Info...
Bede plate rack 1200mm long x 336mm high x 21mm thick.
Rack has 25 x 10mm spindles at 48mm centres.


More Info...
Bede spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
* ...

More Info...
Bede corbel 245mm high x 188mm wide x 137mm deep.

Traditionally styled corbel and bracket accessories offer decorative focal points. Traditionally used to enhance archways these decorative supports can also be used as shelf supports, mantle supports or under beams and worksurfaces.


More Info...
Bede bracket 267mm high x 79mm wide x 149mm deep.

Traditionally styled corbel and bracket accessories offer decorative focal points. Traditionally used to enhance archways these decorative supports can also be used as shelf supports, mantle supports or under beams and worksurfaces.


More Info...
Bede radius feature end panel pack

Pilaster is 890/1210/2120mm high x 50mm wide x 100mm deep.
Spacer is 890/1210/2120mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end panel ...

More Info...
Bede 50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).


More Info...
Bede floor pilaster.
890mm high x 75mm wide x 100mm deep.


More Info...
Bede decorative column which can be used as an attractive feature,
or to fill those awkward spaces. 890x65x65mm.


More Info...
Bede dresser pilaster.
1210mm high x 75mm wide x 100mm deep.



More Info...
Bede full pilaster.
2120mm high x 75mm wide x 100mm deep.




More Info...
Bede side mantel piece with features to co-ordinate with the door. A top mantel piece is also available.

1500mm long x 250mm wide x 20mm thick.

Note: These mantels have radiused edges and may require mitre joints.


More Info...
Bede mantel top panel, 1500x250x20.5mm

Note: These mantels have radiused edges and may require mitre joints.


More Info...
Bede shelf support, solid timber, finished on both faces.
Supplied singularly. 190mm high x 137mm wide x 18mm thick.


More Info...
Bede corner moulding. Supplied as pairs.
150mm high x 120mm wide x 18mm thick.


More Info...
Bede solid timber shelf edging.
2400mm long x 18mm wide x 7mm thick.


More Info...
Bede end panel, finished on face, reverse and 4 square edges,
2400 x 650 x 18mm


More Info...
Bede end panel, profiled front edge, finished on face, reverse and 3 square edges,
2400 x 610 x 28mm


More Info...
Bede flying shelf, profiled front edge, finished on face, reverse and 3 square edges, 2400 x 325 x 28mm


More Info...
Bede end panel, tongue & groove, profiled front edge, finished on face, reverse plain and 4 square edges,
2400 x 650 x 18mm


More Info...
A roll of pre-glued melamine edging tape, suitable for use with Bede. 100m long x 22mm wide.



More Info...
Bede veneer edging, un-glued, 3m x 32mm


More Info...
Bede PVC edging, available in two sizes,
150m x 23 x 0.8mm and 100m x 23 x 2mm


More Info...

3D Kitchen Catalogue | PWS Classics | Bede

Your Basket
.
.
Items:..
.
Value:..
.

See what's in your basket
.
Home Delivery Secure Payments - Find Out More...Customer ServicesYour Money Back Guarantee Easy ReturnsSee Customers TestimonialsVisit Our Showroom
What's Hot
Ready Made Fitted Kitchen Carcasses at Trade Prices

Ready Made Cabinets

All our fitted kitchen carcase units are factory glued & doweled for rigid construction and delivered to you fully assembled, saving you time & money on your kitchen installation.

CLIP top BLUMOTION soft close hinges and Blum TANDEMBOX full extension soft close drawer systems come as standard on every kitchen.

Find out more...

___________________

3D Kitchen Designs

3D Kitchen Designs

Because every new fitted kitchen is unique, our collection of on-line kitchen design photo's can be inspirational and a catalyst for your own kitchen ideas.

Find out more...

___________________

Certification Authorities

___________________

| Top of page |

3D Kitchens Limited
3 Halesowen Road, Halesowen,
West Midland, England, B62 9AA
Telephone 0121 602 3332
Registered in England & Wales - 06853600
VAT Registration Number - 971 4979 69

home | store top | FAQ's | best sellers | new products | view basket | delivery | contact us | links | log in
terms & conditions | privacy | website by 3DKitchens
| copyright © 2009 3D Kitchens Limited | site map

SSL